What is the latest phiên bản of ae888. com
( V1 ) firmware ?
Improve your AFC(V1) user experience with the latest AFC(V1) update
Thes e instructions are only for the V1 phiên bản of the AFC, the phiên bản type is shown in the serial number on the unit e. g. AFC-V1-1234
A hot nhất phiên bản of the AFC updater was released on 10 May 2022, please tải về & run the mới nhất updater software in order lớn cập nhật your AFC as previous versions may fail phệ cập nhật the AFC .
The latest AFC ( V1 ) cập nhật ( 2.6.2 ) :
- qEVsingle Gen 2 columns now supported.
- Colours updated to match AFC V2.
- qEV maximum buffer volume increased from 2 x mặc định fraction volume above mặc định buffer volume, mập ba x .
- qEVoriginal Gen 2 & qEV1 maximum fraction volume adjusted bự 5.0 mL from 4.8 mL, 4.7 mL respectively .
AFC(V1) software update instructions
- Download the Updater installer and install it.
- Plug AFC into the power supply and turn it on .
- Do not remove power from the AFC during the update.
- If the AFC was not powered on during the update process, the AFC will notify the user that the update must be repeated with the power on.
- Plug the AFC into the USB port of computer (with the updater already installed).
- Open the AFC Updater program. The program should appear like the image below:
If the AFC Updater shows multiple COM ports ( communication port ) và none of these are labelled AFC, follow these steps bự determine the COM port of your AFC :
- Open the program without an AFC attached via USB to the PC, and take note of the available COM ports in the dropdown menu.
- Restart the program with the AFC connected and powered on, and take note of any new COM ports that have appeared. The new COM port will be your AFC.
- Select it, and continue with the update as normal.
- A popup will appear if you do not have the latest AFC firmware on your machine, select ‘Get Update’ to download the update.
- Ensure the AFC is selected in the dropdown box labelled “Port”. For AFC Firmware versions prior to 2.2.8, the version number will not appear in the dropdown box.
Ensure that the AFC is powered on at this stage
- Click on “Update AFC to X.X.X“ to update the AFC. The update is expected to take 45 minutes, but can take up to 2 hours depending on your configuration.
DO NOT kết nối or disconnect any USB devices, allow the computer mập go into sleep mode or turn off the AFC during the cập nhật process as this can interrupt the installation. If the AFC is turned off or the computer goes into sleep mode during cập nhật or USB removed, first ensure the AFC is unplugged và turned off, before re-attempting cập nhật process from the beginning. If problem persists, tương tác tư vấn .
Once the cập nhật is complete, ensure that the home page màn hình hiển thị of the AFC displays the mới nhất phiên bản X.X.X.
Test that the AFC operates correctly by going through a run on a column with filtered PBS. Once you have confirmed that the AFC is flushing, you can cut short the “flushing” step if you wish.