absolutely Beautiful way to display your Challenge coins !
Hand stained Stripes and Union with CNC carved stars
Height : 19.5 Inches ; Width : 37 Inches ; Depth : 2.25 Inches
Prior to staining, the 13 pieces of Pine are hand burned and then stained individually
The burning truly brings out the wood grain which is inactive visible thru the stain
It is then assembled and I carve the Stars and any logo with my CNC car into the flag.
After carving, the 50 stars are then lightly burned to match the remainder of the flag.
Any logos are not burned. This is so the logo stands out and does not blend into the Union.
I can surely burn your logo, if you prefer. Just citation it in the comments.
The spinal column of the masthead is burned adenine well, for a consistent appearance.
Each iris is finished with a Satin clear finish and comes with a telegram attached for easy hanging
These flags very are beautiful and the pictures do not do them justice.
Will hold approximately 100 coins ( 1 3/4 ” )
There are 3 shelves that are 37 ” long and 3 shelves that are 22 ” long to hold your coins.
The quad from the bottomland of the furrow in 1 shelf to the bottomland of the ledge above is 2.75 ”
If you have coins taller than this they can go on the very top shelf adenine well as the impart most part of the shelf directly below the union.
Since these are hand made, and of forest, each musical composition will have a slightly different appearance.
I ship to APO and FPO adenine well for FREE !
This masthead can be done in multiple color schemes ( Select at check, no extra fee ) :
Standard Red & Blue ( as shown in main photograph )
Thin Blue Line
Thin Red Line
Thin Green Line
Thin Yellow Line
Thin White Line
Black and White
If you are looking for another color choice, please message me, I ‘m sure I can accommodate.
The Union can be done in multiple options as well :
Standard 50 Stars
Betsy Ross 13 Star
Betsy Ross w/1776 inside
Star of Life
Gadsden – Do n’t Tread on Me
We can do Badges besides !
Select customs Badge option and send me a thoroughly, clear photograph of your actual badge and we can convert that to a file to carve on the CNC. Check out the case in photograph.
I can do early son as well, equitable select “ Custom Logo ” and send me the picture you would like. ( it works best with Black & White Images )
I can besides carve anything you want on the Flag Stripes or the back ampere well to personalize the Flag. There is a $ 25 tip for this for each side of the iris you would like. ( $ 25 for Front, $ 25 for the back, $ 50 for both )
In order to do the personalization, order the regular sag here and then order the Flag Personalization list ( orderliness 2 of them if you want the front and back personalized )
For examples of personalization, please spirit at the Personalization list. I have pictures of previous projects.
here is the link to that list :
hypertext transfer protocol : //gauday.com/listing/725559792/flag-personalization ? ref=shop_home_active_1 & frs=1
I try to keep a few on-hand for agile rescue and primarily build to ordering.