ISO 9001:2015 Approved!
The ISO 9001:2015 ballot has been approved. According to ASQ, who released the ballot results, there were 75 approvals, zero disapprovals, and 5 abstentions (Canada, Honduras, Kazakhstan, Luxembourg, and Qatar).
Comments gathered during the balloting process will be reviewed this weekend by the editing team. It’s planned at this time that the standard will show a September 15 publication date. The final International Standard version of ISO 9001:2015 is scheduled for release on September 23. It will be available from national standards bodies. Here’s a list of some national standards bodies:
For other countries, visit ISO’s member body directory here.
The release of ISO 9001:2015 is the culmination of a long review process. For more information on ISO’s standards revision process, see our InsideStandards revision FAQs here. For more in on the ISO 9001:2015 standard, see our ISO 9001:2015 FAQs here.
The ISO 9001:2015 standard revision process began almost as soon as ISO 9001:2008 was published. All ISO standards go through a six-stage development process whether they are new or revisions to existing standards:
- Proposal stage. This first step is to confirm that a new or revised international standard in the subject area is really needed. A new work item proposal (NWIP) is submitted to the committee for a three-month vote. A simple majority of the participating (P-) members of the TC must approve the proposal and at least five must actively support it and nominate experts. A project leader is usually nominated at this time. If there are possible complications around copyright, patents, or conformity assessment they should be raised at this early stage. This stage can be skipped for revisions and amendments to ISO standards that are already published.
- Preparatory stage. A working group (WG) is usually set up by the parent committee to prepare the working draft (WD). The WG is made up of experts and a convenor (usually the project leader). During this stage, experts continue to look out for issues around copyright, patents, and conformity assessment. Successive WDs can be circulated until the experts are satisfied that they have developed the best solution they can. The draft is then forwarded to the WG’s parent committee to determine which stage to go to next (committee stage or enquiry stage).
- Committee stage. This stage is optional. (For guidance on when it can be skipped see Annex SS of the ISO/IEC Directives Part 1.) During this stage the draft from the working group is shared with the members of the parent committee. If the committee uses this stage, the committee draft (CD) is circulated to the members of the committee who then comment and vote. Successive CDs can be circulated until consensus is reached on the technical content. ISO defines consensus as, “General agreement, characterized by the absence of sustained opposition to substantial issues by any important part of the concerned interests and by a process that involves seeking to take into account the views of all parties concerned and to reconcile any conflicting arguments.” Consensus need not imply unanimity.
- Enquiry stage. The Draft International Standard (DIS) is produced and is submitted to ISO Central Secretariat by the committee secretary. It is then circulated to all ISO members who get three months to vote and comment on it. The DIS is approved if two-thirds of the P-members of the TC/SC are in favor and not more than one-quarter of the total number of votes cast are negative. If the DIS is approved, the project goes straight to publication. However, the committee leadership can decide to include the FDIS stage, if needed.
- Approval stage. This stage will be automatically skipped if the DIS has been approved. However, if the draft has been significantly revised following comments at the DIS stage (even if the DIS has been approved) committees can decide to carry out this stage. (See the ISO/IEC Directives Part 1, 2.6.4 for more information.) If this stage is used, the Final Draft International Standard (FDIS) is submitted to ISO/Central Secretariat (ISO/CS) by the committee secretary. The FDIS is then circulated to all ISO members for a two-month vote. The standard is approved if a two-thirds majority of the P-members of the TC/SC is in favor and not more than one-quarter of the total number of votes cast are negative. (See the ISO/IEC Directives Part 1, 2.7 for more information.)
- Publication stage. At this stage, the secretary submits the final document for publication. Only editorial corrections are made to the final text. It is published by the ISO Central Secretariat as an International Standard. Committee secretaries and project leaders get a two-week sign off period before the standard is published.
TAG: ISO 9001:2015 Approved
